This tool is used instead of a lead knife for cutting small leads. Sharp blades give a clean cut & handle is spring loaded to retract.
TMO000
Aluminum Lead Vise
Grooved teeth to keep lead came in place while stretching. Made of die-cast aluminum for years of trouble-free use.
TMV001
LATHEKIN Flat Fit
Use for opening lead channel, closing lead channel, burnishing foil on glass
TML001
LATHEKIN Plastic Fit
High impact plastic lead opener with a little different shape. Use for opening lead channel, closing lead channel, burnishing foil on glass.
TML000
Wooden Fid
Around for hundreds of years. Still a vaborite with many because of the grip. Use for opening lead chanel, closing lead channel, burnishomg foil on glass.
TMLW00
Glass Pliers
Steel Running Pliers
TMB007 Large 8" Long
TMB010 Mini 6 1/2" Long
Glazing Hammer
Glazing Hammer
Used for setting glass and nails, etc....
TMH000
Gold Marker Pens
Gold Maker Pen
Felt nibbed pens filled with permanent gold paint used for covering solder joints. These pens will cover the solder and match up nicely with the color of the brass cames
High quality import geared to pro use, but inexpensive enough for students.
TLP001
IMPORTED Grozer/Breaker
TBK002
Mosaic Glass Plier
Professional cutter for mosaic glass. A slight turn of the carbide wheel brings a sharp edge to the glass as the cutting surface wears. All steel construction with spring return to full opening.
TLP006
Pattern Shears
IMPORTED Foil & Lead Pattern Shear
Same as FAN OUT's shears above.
TBK005 Foil Pattern Shear
TBK004 Lead Pattern Shear
Brushes
Bench Brush
TMB006
Large Cement Brush
Filled with palmyra
TMB003 1" trim, 7-1/4" x 2-1/4"
Small Cement Brush
Plastic fill is staple-set into hard hardwood.
TMB002 3/4" trim, 5" x 1-1/2"
Flux Brush
6" tubular steel handle, horse hair
TMB004
Scouring Brush
Tampico fiber, staple-set into hard wood block
TMB005
Wire Brush
Curved handle, filled w/fine .005 stainless steel wire. Use to clean lead joints.
TMB001
Came Bender
Cascade Came Bender
Can be used for copper, brass & zinc. No need to change rollers anymore. You can roll your border "U" channels as well as the "H" shapes all on one set of rollers.
TCCB0000
Drill Bits
Diamond Coated Drill Bit.
Clean holds in glass effectively. Simple to use & fit portable electric drill.
TGL45013 1/8"
TGL45025 1/4"
TGL45038 3/8"
FAN OUT's Grozer/Breaker
This is a combination grozer/breaker which many people prefer due to its versatility. While performing most of the features of the breaker, it is also used to nibble jagged part or eat away small amount of glass or shape glass such as inside curves.
TFO005
FAN OUT's Lead Dyke
This tool is used instead of a lead knife for cutting small leads. Sharp blades give a clean cut & handle is spring loaded to retract.
TFO007
Notchers
LIL's Notchers
The hand tool that cuts a perfect notch out of both sides of a single sided U channel with a simple push on the handle. There are two notchers available. One cuts a perfect 90 degree notch while the other notcher cuts a perfect 45 degree notch. They are not inter-chageable. The notcher is not designed to notch borderor H's channels.
TCN 45 Notcher
TCN 90 Notcher
FAN OUT's Foil Pattern Shear (Blue Handle)
This tool is like a pair of scissors with three blades. The center blade removes .036, or slightly more than 1/32".
TFO002
FAN OUT's Lead Pattern Shear (White Handle)
This tool is like a pair of scissors with three blades. The center blade removes .072, or slightly more than 1/16".
TFO001
Foiling Devices
Copper Foil Dispenser
Holds 7 sizes of foil plus scissors, etc. Can also accomodated 2 small animal, 1 can of hickory smoked taffy or 3 bagels.
