Grinders & Accessories by
Hollander Glass Inc.
G8 All Star
Commercial duty, high efficiency motor.  Estra wide, heavy body assures vibration free work surface.  Comes with 1" & 14" heads, Mini-Table, Straight Edge Guide, Flexible Splash Guard, Eye Shield & Water Pump system.  5 year no faulty warranty.  Available in 220V
G12 Super Star II
On/Off switch moved out of the way.  A tool "pull-out" drawer is on the front for storage of extra heads, etc....Comes with 3/4", 1/4" heads and straight edge guide.  Do not need an adaptor for 1/8" or 1/4" heads.  5 year no faulty warranty. 
Available in 220V
G14 Diamond Star
Economical version of the G-12. Comes with a 3/4 head and less power motor.  Do not need an adaptor for 1/8" or 1/4" heads.  5 year no faulty warranty. 
Available in 220V
Grinder Heads
TGL303063/4" Grinding Head Standard
TGL303073/4" Grinding Head Fine Grit
TGL303303/4" Grinding Head 60 Grit
TGL304061" Grinding Head Standard
TGL304071" Grinding Head Fine Grit
TGL304081" Grinding Head 60 Grit
TGL305215/8" Grinding Head Standard
TGL305225/8" Grinding Head Fine Grit
TGL307101/4" Grinding Head All Models
TGL307201/4" Grinding Head Fine Grit
TGL307301/8" Grinding Head Standard
TGL307401/8" Grinding Head Fine Grit
Glass Eye Shield Support  
Glass, furnished by the user, lifts up and out of the support for esy cleaning.  Accomodate 1/8" thick glass.  Fits all Glastar Gruinders except G5.

Molded Delrin with waffle pattern surface that will not scratch Glass.
TGL30550Molded Top Plate Kit G5
TGL30750Molded Top Plate Kit G7, G12, G14
TGL30850Molded Top Plate Kit G8
Universal Mini Table   
For Glastar's G6, G7, G12, G14 Grinders and all INLAND machines.  Attaches for convenient supports when grinding with 1/4" or 1/8" head
Molded Eye Shield
Make of hard polycarbonate; protects eyes and face from flying glass chips.  Fits all Glastar Grinders except G8
Straight Edge Guide   
Permit the user to grind straight sided rectangles or square to an exact size. (Up to 6" for All Star, 3-3/4" for Super Star II and Diamond Star).
Head Adaptor
Head Adaptor
Needed with 1/8" and 1/4" heads for use on G3, G4, G7, Old Style G12 & G14 Grinders.  G12 & G14 Grinders sold after 2/2004 do not need adaptor for 1/8" and 1/4" heads.
TGL30365       Jewelry Fine Grit Head
G-8 Mini Table  
Provides work surface on which to rest glass when using 1/4" or 1/8" head. Pump water to automatically lubricate head.
Molded Top Plates
"Griffi" Glass-Gripper    
The Griffi lies flat on the grinder work surface and grips the glass tight with its rugged jaws.  It can hold a piece of glass as small as 1/4" against the grinding head.
TGL 40486